SEG Graphic Information Requirements

Orbus prints graphics for a wide variety of aluminum Silicone Edge frames and systems. We stock Orbus and non-Orbus frames and a variety of beading types and widths, ensuring the perfect graphic fit for any frame system!
These instructions will help you prepare a graphics' order by collecting a frame's measurements and other required information and to help you set up and remove SEG graphics.

How to Apply & Remove Graphics

INSTALLATION AND REMOVAL OF SEG GRAPHICS IS EASY!

1
Installation:
Push the SEG bead into each corner of the frame (1-4) with your thumb.
Step 1
Step 2
2
Push the SEG bead into the middle of the run (5-8) and work your way around the perimeter of the frame until all beading is pushed in properly.
3
If necessary; Go around the perimeter again to ensure beading is secure in the extrusion profile.
Step 3
Step 4
Removal:
Use the pull tab located on the graphic and gently pull the graphic from the frame, going around the perimeter

SEG Information Requirements

1
FRAME/PANEL DIMENSIONS W&H IN INCHES
Measure this way to ensure success!


How to Measure: Measure the outer interior edge of the channel to the opposite outer interior edge of channel.

Edge to edge, graphic measures 11.75"


lines Frame



Ensure to measure the combination of frames if there are more than one.






FRAME BRAND/STYLE IS STRONGLY RECOMMENDED
Learn what systems and profiles Orbus prints SEG graphics for. Learn more »


2
FINISHING PREFERENCE
Silcone Edge Graphics (SEG)
Velcro Graphics


3
BEADING THICKNESS
Thinner = 1/16”
Thicker = 1/8”



4
MATERIAL PREFERENCE
NON BACKLIT, Opaque Fabric Options:
- Eclipse New (100% opaque stretch material with black, blockout backer - Dye-sublimation)
- Power Stretch (Polyester Stretch Material - Dye-sublimation)

BACKLIT, Non-Opaque Fabric Options:
- Backlit Textile (8oz. backlit fabric material/satin feel - Dye-sublimation)
- Intensity (6.5oz. backlit material/canvas feel)

Liner Information:
Light-weight, white, opaque liners are available as an option for an additional cost. Liners work well with Power Stretch as well as backlit SEG graphics.
Talk to your sales rep for more information.

5
LINE DRAWINGS WITH GRAPHIC DIMENSIONS OUTLINED (OPTIONAL)
a For best results, a line drawing with outlined graphic dimensions is suggested. If test set-up is required, line drawings are essential.
If notching is required on the graphic(s), a line drawing is required.

b If you desire to send the frame system for set-up, instructions are required and standard set-up rates will apply. Your sale representative will provide an estimate per the hours required.

Note: We recommend that notching is handled on the show floor when the full exhibit is installed. If you require notching prior to set-up, a line drawing is required.

GRAPHIC TURNAROUND TIMES AFTER PROOF APPROVAL:
Inline 10’ 3 days
Inline 20’ & 30’ 4 days
Island 20’x20’ 5 days
Larger Island Call for Quote


DON’T FORGET!
Orbus offers FREE color matching, NO set-up fees and RUSH GRAPHICS are available!

NEED HELP?
Request a graphic sample for test fitting if you need one!
Call (630) 226-1155 or CONTACT US to request.

SEG Booths